Our Products

Types of Materials Used: Carbon steel, Austenitic and duplex stainless steel, High and low alloy materials, Nickel.

Pressure Vessels

Pressure Vessels

Pressure Vessels

All Drummond Welding & Steel Works pressure vessels are manufactured to ASME Section VIII Division 1 and CSA B51. All vessels can be Code stamped (U stamp) and National Board registered as required.

View all details

Drummond Welding & Steel Works is also registered for repairs and/or alterations of boilers, pressure vessels, and other pressure-retaining items in accordance with the National Board of Boiler & Pressure Vessels “R” Code Stamp.

 

Here is brief the list of devices that can be produced:

  • Deaerators
  • Reactors
  • Water Conditioning vessels
  • CO2 tanks
  • Autoclaves
  • Petrochemical towers
  • Air receivers
  • Absorbers
  • SO2 tanks
  • Process Columns

Asphalt Storage tanks

Asphalt vertical tanks

Asphalt vertical tanks

Drummond welding and steel Works has built itself an enviable reputation on the market for the manufacture and design of Asphalt Storage tanks, either vertical or horizontal, from 75,000 liters (*) to 130,000 liters (**). Tanks with customized volumes can also be manufactured by our team of experts.

(*) Equivalent; 16500 IG or 19800 AG
(**) Equivalent; 28600 IG or 34350 AG

View all details

Our tanks are manufactured to ULC & API standards. The use of ASME standards is required for the construction of coil systems for the heating of asphalt product. Our systems are available with a wide range of accessories to adapt them to the specific needs of the customers.

Asphalt vertical and horizontal units

Asphalt vertical and horizontal units

Heating coils

The use of the ASME standard for the manufacture of heating coils is essential to the proper functioning of the unit and ensures the quality required for long lasting use.

Storage tanks

ULC double wall tank.

ULC double wall tank.

Drummond Welding and Steel Works manufacture oil and gas storage tanks built according to UL and ULC standards for single and double wall underground tanks equipped with a cathodic protection system and coated with high corrosion resistance paint, all governed by a 30-year warranty.

View all details

No project is too big for Drummond! The size of the workshop, its lifting capacities and its linear configuration provides a consistent flow of activities, ensuring timely deliveries.

Drummond can also meet all UL, ULC or API requirements for vertical or horizontal single- or double-walled horizontal and vertical tanks as well as above-ground horizontal dike tanks etc.

We can respond to a quote request within 24 hours and deliver your tank within 4 weeks in most cases (upon the workload in the shop).

Here is the list of tanks that can be produced:

  • Oil and fuel storage tanks manufactured to UL and ULC standards
  • Underground tanks, single or double wall, equipped with a cathodic protection system
  • Vertical or horizontal tanks above ground, single or double wall
  • Above-ground horizontal dike tanks

Modular Piping System

Modular piping for petro chemical

Modular piping for petro chemical

  • Computer-assisted engineering and 3D modeling.
  • Construction of piping in accordance with ASME B31.1 and B31.3.
  • Accreditation according to CSA W47.1 div 3 for construction of steel structures.
  • 70,000 square feet shop space enabling us to assemble modules of 24 feet x 24 feet x 100 feet long, protected from the elements.

View all details

Photo gallery

Separator 2 phases Equipment (oil & gas).

Separator 2 phases Equipment (oil & gas).

Fabrication of modular piping for petro chemical Project.

Fabrication of modular piping for petro chemical Project.

Weldment fabrication and others

Penstock

Manufacture of large penstock for a Hydro-electric project. Input diameter of 12 feet and diameter of both pipes is 10 feet, total length 72 feet and a width of 75 feet.

We have accreditation from the Canadian Welding Bureau (CWB) for the manufacture of welded steel structures.

In addition, Drummond is able to manufacture several other products and parts to meet your needs.

View all details

Photo gallery

Fit up and welding of a large weldment in one of our two 14 feet deep pits.

Fit up and welding of a large weldment in one of our two 14 feet deep pits.

Trial fit-up of a plenum with its cyclones supports for a refinery reactor.

Trial fit-up of a plenum with its cyclones supports for a refinery reactor.

Other types of products:

  • Acid storage tanks.
  • Integrated asphalt tank systems.
  • Skid Mounted Assembly Systems.
  • Silos
  • Plenum chambers
  • Penstocks with expansion joints
  • Refractory-lined Equipment
  • Reactor ducting
  • Bins, hoppers & ducting
  • Stairs, ladders and platforms etc.

Shop and Field Erected Tanks

Tanks to be assembled at the shop or on site.

Tanks to be assembled at the shop or on site.

With more than half a century in the tank fabrication business, we offer design and manufacturing services for the production of aboveground and underground storage tanks with capacities from 500 to more than a million gallons. They will conform to one of the following API, UL or ULC codes.

View all details

API: 620/650
With in-house engineering and PE stamp capabilities, Drummond Welding and Steel works can design and manufacture welded steel tanks suitable for the storage of oil, gasoline, chemical, and fire water storage according to API 620, API 650 and NFTA-22 standards.

In addition to manufacturing high quality tanks, we can also assist our customers with field construction of storage tanks in Ontario and Atlantic provinces up 120 feet diameter.

ULC: S601, S602, S603, S603.1, S653 & UL: 142, 58
Whether its single wall or double wall, above ground or underground tanks that you need for storage of flammable and combustible liquids or any other products, we can build it for you!Offering a wide range of tanks suitable for any harsh environment with corrosion protection systems that are build to last and meet your expectations.

You will always find what you need at Drummond Welding & steel works and you can count on us for our fast delivery and our trade mark quality products.

Our Services

All Drummond’s qualified staff are committed to provide our customers with the highest level of customer satisfaction for our quality, delivery and service.

Preparation & Finishing

Services  offered:

  • Sandblasting: to SSPC-SP5, SP6, and SP10
  • Painting: all categories, no limit
  • Galvanizing
  • Metallization
  • Rubber lining
  • Insulation
  • Concrete lining
  • Refractory lining.

Tank insulation

Services  offered:

  • Mineral wool
  • Urethane insulation
  • Concrete lining
  • Refractory lining

Non-Destructive testing

Services  offered:

  • PT (liquid penetrant)
  • RT (radiography examination)
  • MT (magnetic particles)
  • Hardness testing
  • UT (ultrasonic examination)
  • PMI (Positive material Identification analysis)